青海省人民政府关于印发《青海省国家行政机关和企业、事业单位印章规定》的通知
青海省人民政府
青海省人民政府关于印发《青海省国家行政机关和企业、事业单位印章规定》的通知
青海省人民政府
通知
现将《青海省国家行政机关和企业、事业单位印章规定》发给你们，请遵照执行。
第一章 总 则
第一条 为加强印章管理，使全省国家行政机关和企事业单位印章管理工作规范化、制度化，根据《国务院关于国家行政机关和企业、事业单位印章的规定》，制定本规定。
第二条 本规定适用于青海省国家行政机关和企业、事业单位印章的制发和管理工作。
第二章 印章的规格、式样和制发
第三条 国家行政机关和企业、事业单位、社会团体的印章一律为圆形。
第四条 省人民政府的印章，直径五厘米，中央刊国徽，国徽外刊机关名称，自左而右环行，由国务院制发。
第五条 省政府各部门、各直属机构、办事机构、直属事业单位及省政府设置的议事机构、非常设机构和直接批准的全省性公司，凡副厅级以上单位的印章，直径均为四点五厘米，中央刊五角星，五角星外刊单位名称，自左而右环行，由省人民政府制发。
第六条 自治州、县、自治县、市、市辖区人民政府的印章，直径四点五厘米，中央刊国徽，国徽外刊机关名称，自左而右环行，由省人民政府制发。
第七条 行政公署的印章，直径四点五厘米，中央刊五角星，五角星外刊机关名称，自左而右环行，由省人民政府制发。
第八条 行政委员会的印章，直径四点二厘米，中央刊五角星，五角星外刊机关名称，自左而右环行，由上一级人民政府制发。
第九条 乡、镇人民政府的印章，直径四点二厘米，中央刊五角星，五角星外刊机关名称，自左而右环行，由县、自治县、市人民政府制发。
第十条 各级国家行政机关所属部门及企业、事业单位，凡地、厅级单位的印章，直径四点五厘米；县处级或相当于县处级单位的印章，直径四点二厘米；科级或相当于科级单位的印章，直径四点零厘米；股级单位的印章，直径三点八厘米。印章中央一律刊五角星，五角星外刊单位名
称，自左而右环行，或者名称的前段自左而右环行、后段自左而右横行，按照隶属关系和归口管理原则，分别由上一级领导机关和行政主管部门制发。
第十一条 社会团体、私营企业、“三资”企业、个体工商户和本规定未涉行业的印章，其规格、式样和制发，按国家有关部门的规定办理，或根据有关规定，由省行政主管部门另行规定制发办法。
第十二条 新刻制的印章，原则上由制发机关负责行文启用。
第三章 印章的名称、文字、字体和质料
第十三条 印章所刊名称，应为本机关法定名称。自治州、县、自治县、市人民政府的印章，不冠“青海省”名称。行政公署的印章，冠“青海省”名称。市辖区、镇人民政府的印章和乡人民政府的印章，冠市或县（自治县）的名称。印章所刊名称字数过多、不易刻印清晰时，可以适
当采用规范通用的简称。
第十四条 自治州、自治县、民族乡和少数民族人口聚居县、乡人民政府的印章，应当并刊汉文和相应的民族文字。民族文字由所在地少数民族语言文字主管部门负责核准。
第十五条 印章的印文，汉文使用宋体字和国务院公布实行的简化字；民族文字使用规范的正楷印刷体。
第十六条 印章质料，由制发机关根据实际工作需要自行确定。
第四章 专用印章的制发
第十七条 省政府各部门、各直属机构和各州、地、市人民政府印制文件时使用的套印印章、印模，规格、式样和正式印章等同，由省人民政府制发。
第十八条 副厅级以上单位的钢印，直径最大不得超过四点二厘米，其它单位的钢印，直径最大不得超过四点零厘米，最小不小于三点五厘米，中央均刊五角星，五角星外刊机关名称，自左而右环行，经上级领导机关或行政主管部门批准后自行刻制。
省政府外事办公室钢印的规格、式样和制发办法按国务院国发（1993）21号文件的规定执行。
第十九条 其他专用章，在名称、式样上应与正式印章有所区别，报上级领导机关或业务主管部门批准后自行刻制。
第五章 印章的刻制、管理和销毁
第二十条 制发印章机关，对印章的刻制和发送必须严格执行国务院、省政府和国家有关部门的规定，加强管理，严格手续，确保安全和质量。
第二十一条 刻制单位印章和各类专用章，必须持相关证件在所在地县级以上公安机关办理准刻手续后，到公安机关指定的刻字单位刻制。当地因技术所限不能承制的，由所在地县级以上公安机关出具证明，指定到西宁市刻制，刻制前须到西宁市公安局再次办理准刻手续。未经公安机
关批准，任何刻字单位或个人不得承接刻制。对未经批准，私自承制、伪造印章和使用伪造印章的，应当依法惩处。
第二十二条 各单位应建立健全印章管理制度。印章要指定专人保管，使用时要严格审批。对本单位印章保管人员要进行详细登记，掌握情况，并报上级领导机关或业务主管部门备案。对丢失印章和违反规定使用印章的，应当根据情节追究保管人和责任人的行政或法律责任。
第二十三条 单位印章，如因机构撤销、变动等原因停止使用时，应将原印章缴回制发机关封存或销毁。单位变更名称或印章损毁需重新刻制时，应向制发机关重新提出申请。新印章在制发机关行文启用后，申请制印单位凭本单位介绍信到制发机关领取，同时缴回原印章。
第二十四条 印章遗失，应及时向原印章制发机关报告备案，并在省级以上报刊上声明作废。刻制新印章必须提交原印章印样和声明作废的报样，按本规定重新申请。
第六章 附 则
第二十五条 省政府办公厅负责对全省国家行政机关各单位印章的制发、管理、销毁工作进行检查指导。发现问题，及时会同有关部门查处。
第二十六条 本规定由省政府办公厅负责解释。
第二十七条 本规定自发布之日起施行。过去有关印章的规定，如与本规定不一致，以本规定为准。
第二十八条 全省国家行政机关和企业、事业单位凡与本规定不符的现有印章，于1998年5月1日一律作废，停止使用。
1997年12月30日
Guidelines on the Risk Management of Commercial Banks’ Information Technology ——附加英文版
China Banking Regulatory Commission
Guidelines on the Risk Management of Commercial Banks’ Information Technology
Chapter I General Provisions
Article 1. Pursuant to the Law of the People’s Republic of China on Banking Regulation and Supervision, the Law of the People's Republic of China on Commercial Banks, the Regulations of the People’s Republic of China on Administration of Foreign-funded Banks, and other applicable laws and regulations, the Guidelines on the Risk Management of Commercial Banks’ Information Technology (hereinafter referred to as the Guidelines) is formulated.
Article 2. The Guidelines apply to all the commercial banks legally incorporated within the territory of the People’s Republic of China.
The Guidelines may apply to other banking institutions including policy banks, rural cooperative banks, urban credit cooperatives, rural credit cooperatives, village banks, loan companies, financial asset management companies, trust and investment companies, finance firms, financial leasing companies, automobile financial companies and money brokers.
Article 3. The term “information technology” stated in the Guidelines shall refer to the system built with computer, communication and software technologies, and employed by commercial banks to handle business transactions, operation management, and internal communication, collaborative work and controls. The term also include IT governance, IT organization structure and IT policies and procedures.
Article 4. The risk of information technology refers to the operational risk, legal risk and reputation risk that are caused by natural factor, human factor, technological loopholes or management deficiencies when using information technology.
Article 5. The objective of information system risk management is to establish an effective mechanism that can identify, measure, monitor, and control the risks of commercial banks’ information system, ensure data integrity, availability, confidentiality and consistency, provide the relevant early warning, and thereby enable commercial banks’ business innovations, uplift their capability in utilizing information technology, improve their core competitiveness and capacity for sustainable development.
Chapter II IT governance
Article 6. The legal representative of commercial bank should be responsible to ensure compliance of this guideline.
Article 7. The board of directors of commercial banks should have the following responsibilities with respect to the management of information systems:
(1) Implementing and complying with the national laws, regulations and technical standards pertaining to the management of information systems, as well as the regulatory requirements set by the China Banking Regulatory Commission (hereinafter referred to as the “CBRC”);
(2) Periodically reviewing the alignment of IT strategy with the overall business strategies and significant policies of the bank, assessing the overall effectiveness and efficiency of the IT organization.
(3) Approving IT risk management strategies and policies, understanding the major IT risks involved, setting acceptable levels for these risks, and ensuring the implementation of the measures necessary to identify, measure, monitor and control these risks.
(4) Setting high ethical and integrity standards, and establishing a culture within the bank that emphasizes and demonstrates to all levels of personnel the importance of IT risk management.
(5) Establishing an IT steering committee which consists of representatives from senior management, the IT organization, and major business units, to oversee these responsibilities and report the effectiveness of strategic IT planning, the IT budget and actual expenditure, and the overall IT performance to the board of directors and senior management periodically.
(6) Establishing IT governance structure, proper segregation of duty, clear role and responsibility, maintaining check and balances and clear reporting relationship. Strengthening IT professional staff by developing incentive program.
(7) Ensuring that there is an effective internal audit of the IT risk management carried out by operationally independent, well-trained and qualified staff. The internal audit report should be submitted directly to the IT audit committee;
(8) Submitting an annual report to the CBRC and its local offices on information system risk management that has been reviewed and approved by the board of directors ;
(9) Ensuring the appropriating funding necessary for IT risk management works;
(10) Ensuring that all employees of the bank fully understand and adhere to the IT risk management policies and procedures approved by the board of directors and the senior management, and are provided with pertinent training.
(11) Ensuring customer information, financial information, product information and core banking system of the legal entity are held independently within the territory, and complying with the regulatory on-site examination requirements of CBRC and guarding against cross-border risk.
(12) Reporting in a timely manner to the CBRC and its local offices any serious incident of information systems or unexpected event, and quickly respond to it in accordance with the contingency plan;
(13) Cooperating with the CBRC and its local offices in the supervisory inspection of the risk management of information systems, and ensure that supervisory opinions are followed up; and
(14) Performing other related IT risk management tasks.
Article 8. The head of the IT organization, commonly known as the Chief Information Officer (CIO) should report directly to the president. Roles and responsibilities of the CIO should include the following:
(1) Playing a direct role in key decisions for the business development involving the use of IT in the bank;
(2) The CIO should ensure that information systems meet the needs of the bank, and IT strategies, in particular information system development strategies, comply with the overall business strategies and IT risk management policies of the bank;
(3) The CIO should also be responsible for the establishment of an effective and efficient IT organization to carry out the IT functions of the bank. These include the IT budget and expenditure, IT risk management, IT policies, standards and procedures, IT internal controls, professional development, IT project initiatives, IT project management, information system maintenance and upgrade, IT operations, IT infrastructure, Information security, disaster recovery plan (DRP), IT outsourcing, and information system retirement;
(4) Ensuring the effectiveness of IT risk management throughout the organization including all branches.
(5) Organizing professional trainings to improve technical proficiency of staff.
(6) Performing other related IT risk management tasks.
Article 9. Commercial banks should ensure that a clear definition of the IT organization structure and documentation of all job descriptions of important positions are always in place and updated in a timely manner. Staff in each position should meet relevant requirements on professional skills and knowledge. The following risk mitigation measures should be incorporated in the management program of related staff:
(1) Verification of personal information including confirmation of personal identification issued by government, academic credentials, prior work experience, professional qualifications;
(2) Ensuring that IT staff can meet the required professional ethics by checking character reference;
(3) Signing of agreements with employees about understanding of IT policies and guidelines, non-disclosure of confidential information, authorized use of information systems, and adherence to IT policies and procedures; and
(4) Evaluation of the risk of losing key IT personnel, especially during major IT development stage or in a period of unstable IT operations, and the relevant risk mitigation measures such as staff backup arrangement and staff succession plan.
Article 10. Commercial banks should establish or designate a particular department for IT risk management. It should report directly to the CIO and the Chief Risk Officer (or risk management committee), serve as a member of the IT incident response team, and be responsible for coordinating the establishment of policies regarding IT risk management, especially the areas of information security, BCP, and compliance with the CBRC regulations, advising the business departments and IT department in implementing these policies, providing relevant compliance information, conducting on-going assessment of IT risks, and ensuring the follow-up of remediation advice, monitoring and escalating management of IT threats and non-compliance events.
Article 11. Commercial banks should establish a special IT audit role and responsibility within internal audit function, which should put in place IT audit policies and procedures, develop and execute IT audit plan.
Article 12. Commercial banks should put in place policies and procedures to protect intellectual property rights according to laws regarding intellectual properties, ensure purchase of legitimate software and hardware, prevention of the use of pirated software, and the protection of the proprietary rights of IT products developed by the bank, and ensure that these are fully understood and complied by all employees.
Article 13. Commercial banks should, in accordance with relevant laws and regulations, disclose the risk profile of their IT normatively and timely.
Chapter III IT Risk Management
Article 14. Commercial banks should formulate an IT strategy that aligns with the overall business plan of the bank, IT risk assessment plan and an IT operational plan that can ensure adequate financial resources and human resources to maintain a stable and secure IT environment.
Article 15. Commercial banks should put in place a comprehensive set of IT risk management policies that include the following areas:
(1) Information security classification policy
(2) System development, testing and maintenance policy
(3) IT operation and maintenance policy
(4) Access control policy
(5) Physical security policy
(6) Personnel security policy
(7) Business Continuity Planning and Crisis and Emergency Management procedure
Article 16. Commercial banks should maintain an ongoing risk identification and assessment process that allows the bank to pinpoint the areas of concern in its information systems, assess the potential impact of the risks on its business, rank the risks, and prioritize mitigation actions and the necessary resources (including outsourcing vendors, product vendors and service vendors).
Article 17. Commercial banks should implement a comprehensive set of risk mitigation measures complying with the IT risk management policies and commensurate with the risk assessment of the bank. These mitigation measures should include:
(1) A set of clearly documented IT risk policies, technical standards, and operational procedures, which should be communicated to the staff frequently and kept up to date in a timely manner;
(2) Areas of potential conflicts of interest should be identified, minimized, and subject to careful, independent monitoring. Also it requires that an appropriate control structure is set up to facilitate checks and balances, with control activities defined at every business level, which should include:
- Top level reviews;
- Controls over physical and logical access to data and system;
- Access granted on “need to know” and “minimum authorization” basis;
- A system of approvals and authorizations; and
- A system of verification and reconciliation.
Article 18. Commercial banks should put in place a set of ongoing risk measurement and monitoring mechanisms, which should include
(1) Pre and post-implementation review of IT projects;
(2) Benchmarks for periodic review of system performance;
(3) Reports of incidents and complaints about IT services;
(4) Reports of internal audit, external audit, and issues identified by CBRC; and
(5) Arrangement with vendors and business units for periodic review of service level agreements (SLAs).
(6) The possible impact of new development of technology and new threats to software deployed.
(7) Timely review of operational risk and management controls in operation area.
(8) Assess the risk profile on IT outsourcing projects periodically.
Article 19. Chinese commercial banks operating offshore and the foreign commercial banks in China should comply with the relevant regulatory requirements on information systems in and outside the People’s Republic of China.
Chapter IV Information Security
Article 20. Information technology department of commercial banks should oversee the establishment of an information classification and protection scheme. All employees of the bank should be made aware of the importance of ensuring information confidentiality and provided with the necessary training to fully understand the information protection procedures within their responsibilities.
Article 21. Commercial banks should put in place an information security management function to develop and maintain an ongoing information security management program, promote information security awareness, advise other IT functions on security issues, serve as the leader of IT incident response team, and report the evaluation of the information security of the bank to the IT steering committee periodically. The Information security management program should include Information security standards, strategy, an implementation plan, and an ongoing maintenance plan.
Information security policy should include the following areas:
(1) IT security policy management
(2) Organization information security
(3) Asset management
(4) Personnel security
(5) Physical and environment security
(6) Communication and operation security
(7) Access control and authentication
(8) Acquirement, development and maintenance of information system
(9) Information security event management
(10) Business continuity management
(11) Compliance
Article 22. Commercial banks should have an effective process to manage user authentication and access control. Access to data and system should be strictly limited to authorized individuals whose identity is clearly established, and their activities in the information systems should be limited to the minimum required for their legitimate business use. Appropriate user authentication mechanism commensurate with the classification of information to be accessed should be selected. Timely review and removal of user identity from the system should be implemented when user transfers to a new job or leave the commercial bank.
Article 23. Commercial banks should ensure all physical security zones, such as computer centers or data centers, network closets, areas containing confidential information or critical IT equipment, and respective accountabilities are clearly defined, and appropriate preventive, detective, and recuperative controls are put in place.
Article 24. Commercial banks should divide their networks into logical security domains (hereinafter referred to as the “domain”) with different levels of security. The following security factors have to be assessed in order to define and implement effective security controls, such as physical or logical segregation of network, network filtering, logical access control, traffic encryption, network monitoring, activity log, etc., for each domain and the whole network.
(1) criticality of the applications and user groups within the domain;
(2) Access points to the domain through various communication channels;
(3) Network protocols and ports used by the applications and network equipment deployed within the domain;
(4) Performance requirement or benchmark;
(5) Nature of the domain, i.e. production or testing, internal or external;
(6) Connectivity between various domains; and
(7) Trustworthiness of the domain.
Article 25. Commercial banks should secure the operating system and system software of all computer systems by
(1) Developing baseline security requirement for each operating system and ensuring all systems meet the baseline security requirement;
(2) Clearly defining a set of access privileges for different groups of users, namely, end-users, system development staff, computer operators, and system administrators and user administrators;
(3) Setting up a system of approval, verification, and monitoring procedures for using the highest privileged system accounts;
(4) Requiring technical staff to review available security patches, and report the patch status periodically; and
(5) Requiring technical staff to include important items such as unsuccessful logins, access to critical system files, changes made to user accounts, etc. in system logs, monitors the systems for any abnormal event manually or automatically, and report the monitoring periodically.
Article 26. Commercial banks should ensure the security of all the application systems by
(1) Clearly defining the roles and responsibilities of end-users and IT staff regarding the application security;
(2) Implementing a robust authentication method commensurate with the criticality and sensibility of the application system;
(3) Enforcing segregation of duties and dual control over critical or sensitive functions;
(4) Requiring verification of input or reconciliation of output at critical junctures;
(5) Requiring the input and output of confidential information are handled in a secure manner to prevent theft, tampering, intentional leakage, or inadvertent leakage;
(6) Ensuring system can handle exceptions in a predefined way and provide meaningful message to users when the system is forced to terminate; and
(7) Maintaining audit trail in either paper or electronic format.
(8) Requiring user administrator to monitor and review unsuccessful logins and changes to users accounts.
Article 27. Commercial banks should have a set of policies and procedures controlling the logging of activities in all production systems to support effective auditing, security forensic analysis, and fraud prevention. Logging can be implemented in different layers of software and on different computer and networking equipment, which falls into two broad categories:
(1) Transaction journals. They are generated by application software and database management system, and contain authentication attempts, modification to data, error messages, etc. Transaction journals should be kept according to the national accounting policy.
(2) System logs. They are generated by operating systems, database management system, firewalls, intrusion detection systems, and routers, etc., and contain authentication attempts, system events, network events, error messages, etc. System logs should be kept for a period scaled to the risk classification, but no less than one year.
Banks should ensure that sufficient items be included in the logs to facilitate effective internal controls, system troubleshooting, and auditing while taking appropriate measures to ensure time synchronization on all logs. Sufficient disk space should be allocated to prevent logs from being overwritten. System logs should be reviewed for any exception. The review frequency and retention period for transaction logs or database logs should be determined jointly by IT organization and pertinent business lines, and approved by the IT steering committee.
Article 28. Commercial banks should have the capacity to employ encryption technologies to mitigate the risk of losing confidential information in the information systems or during its transmission. Appropriate management processes of the encryption facilities should be put in place to ensure that
(1) Encryption facilities in use should meet national security standards or requirements;
(2) Staff in charge of encryption facilities are well trained and screened;
(3) Encryption strength is adequate to protect the confidentiality of the information; and
(4) Effective and efficient key management procedures, especially key lifecycle management and certificate lifecycle management, are in place.
Article 29. Commercial banks should put in place an effective and efficient system of securing all end-user computing equipment which include desktop personal computers (PCs), portable PCs, teller terminals, automatic teller machines (ATMs), passbook printers, debit or credit card readers, point of sale (POS) terminals, personal digital assistant (PDAs), etc and conduct periodic security checks on all equipments.
Article 30. Commercial banks should put in place a set of policies and procedures to govern the collection, processing, storage, transmission, dissemination, and disposal of customer information.
Article 31. All employees, including contract staff, should be provided with the necessary trainings to fully understand these policies procedures and the consequences of their violation. Commercial banks should adopt a zero tolerance policy against security violation.
Chapter V Application System Development, Testing and Maintenance
Article 32. Commercial banks should have the capability to identify, plan, acquire, develop, test, deploy, maintain, upgrade, and retire information systems. Policies and procedures should be in place to govern the initiation, prioritization, approval, and control of IT projects. Progress reports of major IT projects should be submitted to and reviewed by the IT steering committee periodically. Decisions involving significant change of schedule, change of key personnel, change of vendors, and major expenditures should be included in the progress report.
Article 33. Commercial banks should recognize the risks associated with IT projects, which include the possibilities of incurring various kinds of operational risk, financial losses, and opportunity costs stemming from ineffective project planning or inadequate project management controls of the bank. Therefore, appropriate project management methodologies should be adopted and implemented to control the risks associated with IT projects.
Article 34. Commercial banks should adopt and implement a system development methodology to control the life cycle of Information systems. The typical phases of system life cycle include system analysis, design, development or acquisition, testing, trial run, deployment, maintenance, and retirement. The system development methodology to be used should be commensurate with the size, nature, and complexity of the IT project, and, generally speaking, should facilitate the management of the following risks.
Article 35. Commercial banks should ensure system reliability, integrity, and maintainability by controlling system changes with a set of policies and procedures, which should include the following elements.
(1) Ensure that production systems are separated from development or testing systems;
(2) Separating the duties of managing production systems and managing development or testing systems;
(3) Prohibiting application development and maintenance staff from accessing production system under normal circumstances unless management approval is granted to perform emergency repair, and all emergency repair activities should be recorded and reviewed promptly;
(4) Promoting changes of program or system configuration from development and testing systems to production systems should be jointly approved by IT organization and business departments, properly documented, and reviewed periodically.
Article 36. Commercial banks should have in place a set of policies, standards, and procedures to ensure data integrity, confidentiality, and availability. These policies should be in accordance with data integrity amid IT development procedure.
Article 37. Commercial banks should ensure that Information system problems could be tracked, analyzed, and resolved systematically through an effective problem management process. Problems should be documented, categorized, and indexed. Support services or technical assistance from vendors, if necessary, should also be documented. Contacts and relevant contract information should be made readily available to the employees concerned. Accountability and line of command should be delineated clearly and communicated to all employees concerned, which is of utmost importance to performing emergency repair.
Article 38. Commercial banks should have a set of policies and procedures controlling the process of system upgrade. System upgrade is needed when the hardware reaches its lifespan or runs out of capacity, the underpinning software, namely, operating system, database management system, middleware, has to be upgraded, or the application software has to be upgraded. The system upgrade should be treated as a project and managed by all pertinent project management controls including user acceptance testing.
Chapter VI IT Operations
Article 39. Commercial banks should consider fully the environmental threats (e.g. proximity to natural disaster zones, dangerous or hazardous facilities or busy/major roads) when selecting the locations of their data centers. Physical and environmental controls should be implemented to monitor environmental conditions could affect adversely the operation of information processing facilities. Equipment facilities should be protected from power failures and electrical supply interference.
Article 40. In controlling access by third-party personnel (e.g. service providers) to secured areas, proper approval of access should be enforced and their activities should be closely monitored. It is important that proper screening procedures including verification and background checks, especially for sensitive technology-related jobs, are developed for permanent and temporary technical staff and contractors.
Article 41. Commercial banks should separate IT operations or computer center operations from system development and maintenance to ensure segregation of duties within the IT organization. The commercial banks should document the roles and responsibilities of data center functions.
Article 42. Commercial banks are required to retain transactional records in compliance with the national accounting policy. Procedures and technology are needed to be put in place to ensure the integrity, safekeeping and retrieval requirements of the archived data.
Article 43. Commercial banks should detail operational instructions such as computer operator tasks, job scheduling and execution in the IT operations manual. The IT operations manual should also cover the procedures and requirements for on-site and off-site backup of data and software in both the production and development environments (i.e. frequency, scope and retention periods of back-up).
Article 44. Commercial banks should have in place a problem management and processing system to respond promptly to IT operations incidents, to escalate reported incidents to relevant IT management staff and to record, analyze and keep tracks of all these incidents until rectification of the incidents with root cause analysis completed. A helpdesk function should be set up to provide front-line support to users on all technology-related problems and to direct the problems to relevant IT functions for investigation and resolution.
Article 45. Commercial banks should establish service level agreement and assess the IT service level standard attained.
Article 46. Commercial banks should implement a process to ensure that the performance of application systems is continuously monitored and exceptions are reported in a timely and comprehensive manner. The performance monitoring process should include forecasting capability to enable exceptions to be identified and corrected before they affect system performance.
Article 47. Commercial banks should carry out capacity plan to cater for business growth and transaction increases due to changes of economic conditions. Capacity plan should be extended to cover back-up systems and related facilities in addition to the production environment.
Article 48. Commercial banks should ensure the continued availability of technology related services with timely maintenance and appropriate system upgrades. Proper record keeping (including suspected and actual faults and preventive and corrective maintenance records) is necessary for effective facility and equipment maintenance.
Article 49. Commercial banks should have an effective change management process in place to ensure integrity and reliability of the production environment. Commercial banks should develop a formal change management process.
Chapter VII Business Continuity Management
Article 50. Commercial banks should have in place appropriate arrangements, having regard to the nature, scale and complexity of its business, to ensure that it can continue to function and meet its regulatory obligations in the event of an unforeseen interruption. These arrangements should be regularly updated and tested to ensure their effectiveness.
Article 51. Commercial banks should consider the likelihood and impact of a disruption to the continuity of its operation from unexpected events. This should include assessing the disruptions to which it is particularly susceptible including but not limited to:
(1) Loss of failure of internal and external resources (such as people, systems and other assets);
(2) The loss or corruption of its information; and
(3) External events (such as war, earthquake, typhoon, etc).
Article 52. Commercial bank should act to reduce both the likelihood of disruptions (including system resilience and dual processing); and the impact of disruptions (including by contingency arrangements and insurance).
Article 53. Commercial bank should document its strategy for maintaining continuity of its operations, and its plans for communicating and regularly testing the adequacy and effectiveness of this strategy. Commercial bank should establish:
(1) Formal business continuity plans that outline arrangements to reduce the impact of a short, medium and long-term disruption, including:
a) Resource requirements such as people, systems and other assets, and arrangements for obtaining these resources;
b) The recovery priorities for the commercial bank’s operations; and
c) Communication arrangements for internal and external concerned parties (including CBRC, clients and the press);
(2) Escalation and invocation plans that outline the processes for implementing the business continuity plans, together with relevant contact information;
(3) Processes to validate the integrity of information affected by the disruption;
(4) Processes to review and update (1) to (3) following changes to the commercial bank’s operations or risk profile.
Article 54. A final BCP plan and an annual drill result must be signed off by the IT Risk management, or internal auditor and IT Steering Committee.
Chapter VIII Outsourcing
Article 55. Commercial banks cannot contract out its regulatory obligations and should take reasonable care to supervise the discharge of outsourcing functions.
Article 56. Commercial banks should take particular care to manage material outsourcing arrangement (such as outsourcing of data center, IT infrastructure, etc.), and should notify CBRC when it intends to enter into material outsourcing arrangement.
Article 57. Before entering into, or significantly changing, an outsourcing arrangement, the commercial bank should:
(1) Analyze how the arrangement will fit with its organization and reporting structure; business strategy; overall risk profile; and ability to meet its regulatory obligations;
(2) Consider whether the arrangements will allow it to monitor and control its operational risk exposure relating to the outsourcing;
(3) Conduct appropriate due diligence of the service provider’s financial stability, expertise and risk assessment of the service provider, facilities and ability to cover the potential liabilities;
(4) Consider how it will ensure a smooth transition of its operations from its current arrangements to a new or changed outsourcing arrangement (including what will happen on the termination of the contract); and
(5) Consider any concentration risk implications such as the business continuity implications that may arise if a single service provider is used by several firms.
Article 58. In negotiating its contract with a service provider, the commercial bank should have regard to ( but not limited to ):
(1) Reporting and negotiation requirements it may wish to impose on the service provider;
(2) Whether sufficient access will be available to its internal auditors, external auditors and banking regulators;
(3) Information ownership rights, confidentiality agreements and Firewalls to protect client and other information (including arrangements at the termination of contract);
(4) The adequacy of any guarantees and indemnities;
(5) The extent to which the service provider must comply with the commercial bank’s polices and procedures covering IT Risk;
(6) The extent to which the service provider will provide business continuity for outsourced operations, and whether exclusive access to its resources is agreed;
(7) The need for continued availability of software following difficulty at a third party supplier;
(8) The processes for making changes to the outsourcing arrangement and the conditions under which the commercial bank or service provider can choose to change or terminate the outsourcing arrangement, such as where there is:
a) A change of ownership or control of the service provider or commercial bank; or
b) Significant change in the business operations of the service provider or commercial bank; or
c) Inadequate provision of services that may lead to the commercial bank being unable to meet its regulatory obligations.
Article 59. In implementing a relationship management framework, and drafting the service level agreement with the service provider, the commercial bank should have regarded to (but not limited to):
(1) The identification of qualitative and quantitative performance targets to assess the adequacy of service provision, to both the commercial bank and its clients, where appropriate;
(2) The evaluation of performance through service delivery reports and periodic self assessment and independent review by internal or external auditors; and
(3) Remediation action and escalation process for dealing with inadequate performance.
Article 60. The commercial bank should enhance IT related outsourcing management, in place following (not limited to ) measures to ensure data security of sensitive information such as customer information:
(1) Effectively separated from other customer information of the service provider;
(2) The related staff of service provider should be authorized on “need to know” and “minimum authorization” basis;
(3) Ensure service provider guarantee its staff for meeting the confidential requests;
(4) All outsourcing arrangements related to customer information should be identified as material outsourcing arrangements and the customers should be notified;
(5) Strictly monitor re-outsourcing actions of the service provider, and implement adequate control measures to ensure information security of the bank;
(6) Ensure all related sensitive information be refunded or deleted from the service provider’s storage when terminating the outsourcing arrangement.
Article 61. The commercial bank should ensure that it has appropriate contingency in the event of a significant loss of services from the service provider. Particular issues to consider include a significant loss of resources, turnover of key staff, or financial failure of, the service provider, and unexpected termination of the outsourcing agreement.
Article 62. All outsourcing contracts must be reviewed or signed off by IT Risk management, internal IT auditors, legal department and IT Steering Committee. There should be a process to periodically review and refine the service level agreements.
Chapter IX Internal Audit
Article 63. Depending on the nature, scale and complexity of its business, it may be appropriate for the commercial banks to delegate much of the task of monitoring the appropriateness and effectiveness of its systems and controls to an internal audit function. An internal audit function should be adequately resourced and staffed by competent individuals, be independent of the day-to-day activities of the commercial bank and have appropriate access to the bank’s records.
Article 64. The responsibilities of the internal IT audit function are:
(1) To establish, implement and maintain an audit plan to examine and evaluate the adequacy and effectiveness of the bank’s systems and internal control mechanisms and arrangements;
(2) To issue recommendations based on the result of work carried out in accordance with 1;
(3) To verify compliance with those recommendations;
(4) To carry out special audit on information technology. The term “special audit” of information technology refers to the investigation, analysis and assessment on the security incidents of the information system, or the audit performed on a special subject based on IT risk assessment result as deemed necessary by the audit department.
Article 65. Based on the nature, scale and complexity of its business, deployment of information technology and IT risk assessment, commercial banks could determine the scope and frequency of IT internal audit. However, a comprehensive IT internal audit shall be performed at a minimum once every 3 years.
Article 66. Commercial banks should engage its internal audit department and IT Risk management department when implementing system development of significant size and scale to ensure it meets the IT Risk standards of the Commercial banks.
Chapter X External Audit
Article 67. The external information technology audit of commercial banks can be carried out by certified service providers in accordance with laws, rules and regulations.
Article 68. The commercial bank should ensure IT audit service provider to review and examine bank’s hardware, software, documentation and data to identify IT risk when they are commissioned to perform the audit. Vital commercial and technical information which is protected by national laws and regulations should not be reviewed.
Article 69. Commercial bank should communicate with the service provider in depth before the audit to determine audit scope, and should not withhold the truth or do not corporate with the service provider intentionally.
Article 70. CBRC and its local offices could designate certified service providers to carry out IT audit or related review on commercial banks when needed. When carrying out audit on commercial banks, as commissioned or authorized by CBRC or its local offices, the service providers shall present the letter of authority, and carry out the audit in accordance to the scope prescribed in the letter of authority.
Article 71. Once the IT audit report produced by the service providers is reviewed and approved by CBRC or its local offices, the report will have the same legal status as if it is produced by the CBRC itself. Commercial banks should come up with a correction action plan prescribed in the report and implement the corrective actions according to the timeframe.
Article 72. Commercial banks should ensure the service providers to strictly comply with laws and regulations to keep confidential and data security of any commercial secrets and private information learnt and IT risk information when conducting the audit. The service provider should not modify copy or take away any documents provided by the commercial banks.
Chapter XI Supplementary Provisions
Article 73. Commercial banks with no board of directors should have their operating decision-making bodies perform the responsibilities of the board with regard to IT risk management specified herein.
Article 74. The China Banking Regulatory Commission supervises and regulates the IT risk management of commercial banks under its authority by law.
Article 75. The power of interpretation and modification of the Guidelines shall rest with the China Banking Regulatory Commission.
Article 76. The Guidelines shall become effective as of the date of its issuance and the former Guidelines on the Risk Management of Banking Institutions’ Information Systems shall be revoked at the same time.
